1L Shell Morlina S2 B 220
Shell Morlina S2 B 220 is an ISO VG 220 grade Bearing and Circulating Oil.
Shell Morlina S2 B oils are high performance oils designed to provide outstanding oxidation and water separation protection for most general industrial bearing and circulating oil system applications and certain other industrial applications which do not require oils with extreme pressure (EP) properties. These oils meet the requirements of the Morgan Construction Company and Danieli for common bearing oils.
This is a very thick oil. It is particularly suited to gearboxes that require oil to stick to vertical surfaces and gears which are not constantly immersed in lubricating oil, e.g systems that are splash/drip fed.
Please be aware that the oil that you receive may be slightly lighter in colour than displayed in the product image. This has been confirmed with Shell to be part of the normal variation of colour of base oil stocks found in this particular product range and is perfectly normal.
Please note that this oil is suitable for use in gearboxes containing yellow metal bushes/gears/bearings (typically bronze) where the use of gearbox oils containing EP additives would cause damage.
This oil is specified by Harrison in the following machines/applications. (Note this list is not exhaustive)
- Harrison 13AA - Quick Change Gearbox
- Harrison L5/L5A/140 - Quick Change Gearbox
- Harrison L6/165 - Quick Change Gearbox
- Harrison M250 - Quick Change Gearbox
- Harrison M300 - Quick Change Gearbox
- Morgan MORGOIL Lubricant Specification New Oil Rev 1.1
- Danieli Standard Oil 6.123249.F
- DIN 51517-1 Type C
- DIN 51517-2 Type CL
This oil has undergone various name changes during its lifetime, but the specification of the oil has remained the same and the previous equivalent names for this oil are as follows
- Shell Morlina Oil 220
- Shell Vitrea Oil 220
- Shell Vitrea 72 (Pre ISO)
Please check your machine manual for the correct oil specified and ensure you are buying the correct grade of oil for your machine.
If your machine manual specifies a grade of oil that you are finding it difficult to get, then please do get in touch, as I may be able to source it and add it to my stock list.
|Country of Manufacture||United Kingdom|
|Base Oil Type||Mineral Oil|
|Viscosity||ISO VG 220|